246 in Binary

The process of converting 246 from decimal to binary involves dividing the number 246 by 2. It is divided by 2 because the binary number system uses only 2 digits (0 and 1). The quotient becomes the dividend in the next step, and the process continues until the quotient becomes 0.

This is a commonly used method to convert 246 to binary. In the last step, the remainder is noted down bottom side up, and that becomes the converted value.

For example, the remainders noted down after dividing 246 by 2 until getting 0 as the quotient is 11110110. Remember, the remainders here have been written upside down.

In the table shown below, the first column shows the binary digits (1 and 0) as 246.

The second column represents the place values of each digit, and the third column is the value calculation, where the binary digits are multiplied by their corresponding place values.

The results of the third column can be added to cross-check if 11110110 in binary is indeed 246 in the decimal number system.

246 can be converted easily from decimal to binary. The methods mentioned below will help us convert the number. Let’s see how it is done.

Expansion Method: Let us see the step-by-step process of converting 246 using the expansion method.

Step 1 - Figure out the place values: In the binary system, each place value is a power of 2. Therefore, in the first step, we will ascertain the powers of 2.

2⁰ = 1

2¹ = 2

2² = 4

2³ = 8

2⁴ = 16

2⁵ = 32

2⁶ = 64

2⁷ = 128

2⁸ = 256

Since 256 is greater than 246, we stop at 2⁷ = 128.

Step 2 - Identify the largest power of 2: In the previous step, we stopped at 2⁷ = 128. This is because, in this step, we have to identify the largest power of 2, which is less than or equal to the given number, 246. Since 2⁷ is the number we are looking for, write 1 in the 2⁷ place. Now the value of 2⁷, which is 128, is subtracted from 246. 246 - 128 = 118.

Step 3 - Identify the next largest power of 2: In this step, we need to find the largest power of 2 that fits into the result of the previous step, 118. So, the next largest power of 2 is 2⁶, which is 64. Now, we have to write 1 in the 2⁶ place. And then subtract 64 from 118. 118 - 64 = 54.

Step 4 - Continue the process: Find the largest power of 2 that fits into 54, which is 2^5 = 32. Write 1 in the 2^5 place and subtract 32 from 54. 54 - 32 = 22. Now, find the largest power of 2 that fits into 22, which is 2⁴ = 16. Write 1 in the 2⁴ place and subtract 16 from 22. 22 - 16 = 6. Find the largest power of 2 that fits into 6, which is 2² = 4. Write 1 in the 2² place and subtract 4 from 6. 6 - 4 = 2. Finally, the largest power of 2 that fits into 2 is 2¹ = 2. Write 1 in the 2¹ place and subtract 2 from 2. 2 - 2 = 0. We need to stop the process here since the remainder is 0.

Step 5 - Identify the unused place values: In step 2, step 3, and step 4, we wrote 1 in the 2⁷, 2⁶, 2⁵, 2⁴, 2², and 2¹ places. Now, we can just write 0s in the remaining places, which are 2³ and 2⁰. Now, by substituting the values, we get: 0 in the 2⁰ place 1 in the 2¹ place 1 in the 2² place 0 in the 2³ place 1 in the 2⁴ place 1 in the 2⁵ place 1 in the 2⁶ place 1 in the 2⁷ place

Step 6 - Write the values in reverse order: We now write the numbers upside down to represent 246 in binary. Therefore, 11110110 is 246 in binary.

Grouping Method: In this method, we divide the number 246 by 2. Let us see the step-by-step conversion.

Step 1 - Divide the given number 246 by 2. 246 / 2 = 123. Here, 123 is the quotient and 0 is the remainder.

Step 2 - Divide the previous quotient (123) by 2. 123 / 2 = 61. Here, the quotient is 61 and the remainder is 1.

Step 3 - Repeat the previous step. 61 / 2 = 30. Now, the quotient is 30, and 1 is the remainder.

Step 4 - Repeat the previous step. 30 / 2 = 15. Here, the remainder is 0.

Step 5 - Continue the division process. 15 / 2 = 7. The remainder is 1. 7 / 2 = 3. The remainder is 1. 3 / 2 = 1. The remainder is 1. 1 / 2 = 0. The remainder is 1. We stop the division here because the quotient is 0.

Step 6 - Write down the remainders from bottom to top. Therefore, 246 (decimal) = 11110110 (binary).

There are certain rules to follow when converting any number to binary. Some of them are mentioned below:

Rule 1: Place Value Method

This is one of the most commonly used rules to convert any number to binary. The place value method is the same as the expansion method, where we need to find the largest power of 2. Let’s see a brief step-by-step explanation to understand the first rule. Find the largest power of 2 less than or equal to 246. Since the answer is 2⁷, write 1 next to this power of 2. Subtract the value (128) from 246. So, 246 - 128 = 118. Find the largest power of 2 less than or equal to 118. The answer is 2⁶. So, write 1 next to this power. Repeat the process until the remainder is 0. Final conversion will be 11110110.

Rule 2: Division by 2 Method

The division by 2 method is the same as the grouping method. A brief step-by-step explanation is given below for better understanding. First, 246 is divided by 2 to get 123 as the quotient and 0 as the remainder. Now, 123 is divided by 2. Here, we will get 61 as the quotient and 1 as the remainder. Dividing 61 by 2, we get 30 as the quotient and 1 as the remainder. Continue the process until the quotient becomes 0. Now, write the remainders upside down to get the binary equivalent of 246, 11110110.

Rule 3: Representation Method

This rule also involves breaking the number into powers of 2. Identify the powers of 2 and write them down in decreasing order, i.e., 2⁷, 2⁶, 2⁵, 2⁴, 2³, 2², 2¹, and 2⁰. Find the largest power that fits into 246. Repeat the process and allocate 1s and 0s to the suitable powers of 2. Combine the digits (0 and 1) to get the binary result.

Rule 4: Limitation Rule

The limitation of the binary system is that only 0s and 1s can be used to represent numbers. The system doesn’t use any other digits other than 0 and 1. This is a base 2 number system, where the binary places represent powers of 2. So, every digit is either a 0 or a 1. To convert 246, we use 0 for 2³ and 2⁰ and 1s for the other powers present in the number.

Learning a few tips and tricks is a great way to solve any mathematical problems easily. Let us take a look at some tips and tricks for binary numbers up to 246.

Memorize to speed up conversions: We can memorize the binary forms for numbers by breaking them into smaller sections.

Recognize the patterns: There is a peculiar pattern when converting numbers from decimal to binary.

Even and odd rule: Whenever a number is even, its binary form will end in 0. For example, 246 is even, and its binary form is 11110110. Here, the binary of 246 ends in 0. If the number is odd, then its binary equivalent will end in 1.

Cross-verify the answers: Once the conversion is done, we can cross-verify the answers by converting the number back to the decimal form. This will eliminate any unforeseen errors in conversion.

Practice by using tables: Writing the decimal numbers and their binary equivalents in a table will help us remember the conversions.

• Decimal: It is the base 10 number system which uses digits from 0 to 9.

• Binary: This number system uses only 0 and 1. It is also called the base 2 number system.

• Place value: Every digit has a value based on its position in a given number. For example, in 102 (base 10), 1 has occupied the hundreds place, 0 is in the tens place, and 2 is in the ones place.

• Octal: It is the number system with a base of 8. It uses digits from 0 to 7.

• Division Method: A method used to convert a decimal number to binary by dividing the number by 2 and recording the remainder.