67 in Binary

The process of converting 67 from decimal to binary involves dividing the number 67 by 2. Here, it is getting divided by 2 because the binary number system uses only 2 digits (0 and 1). The quotient becomes the dividend in the next step, and the process continues until the quotient becomes 0.

This is a commonly used method to convert 67 to binary. In the last step, the remainder is noted down from bottom to top, and that becomes the converted value.

For example, the remainders noted down after dividing 67 by 2 until getting 0 as the quotient is 1000011. Remember, the remainders here have been written upside down.

In the table shown below, the first column shows the binary digits (1 and 0) as 1000011.

The second column represents the place values of each digit, and the third column is the value calculation, where the binary digits are multiplied by their corresponding place values.

The results of the third column can be added to cross-check if 1000011 in binary is indeed 67 in the decimal number system.

67 can be converted easily from decimal to binary. The methods mentioned below will help us convert the number. Let’s see how it is done.

Expansion Method: Let us see the step-by-step process of converting 67 using the expansion method.

Step 1 - Figure out the place values: In the binary system, each place value is a power of 2. Therefore, in the first step, we will ascertain the powers of 2.

2⁰ = 1

2¹ = 2

2² = 4

2³ = 8

2⁴ = 16

2⁵ = 32

2⁶ = 64

2⁷ = 128

Since 128 is greater than 67, we stop at 2^6 = 64.

Step 2 - Identify the largest power of 2: In the previous step, we stopped at 2⁶ = 64. This is because in this step, we have to identify the largest power of 2, which is less than or equal to the given number, 67. Since 2⁶ is the number we are looking for, write 1 in the 2⁶ place. Now the value of 2⁶, which is 64, is subtracted from 67. 67 - 64 = 3.

Step 3 - Identify the next largest power of 2: In this step, we need to find the largest power of 2 that fits into the result of the previous step, 3. So, the next largest power of 2 is 2¹, which is less than or equal to 3 (in this case equal). Now, we have to write 1 in the 2¹ places. And then subtract 2 from 3. 3 - 2 = 1.

Step 4 - Identify the unused place values: In step 2 and step 3, we wrote 1 in the 2^6 and 2^1 places. Now, we can just write 0s in the remaining places, except for 2⁰. Now, by substituting the values, we get, 1 in the 2⁰ place 1 in the 2¹ place 0 in the 2² place 0 in the 2³ place 0 in the 2⁴ place 0 in the 2⁵ place 1 in the 2⁶ place

Step 5 - Write the values in reverse order: We now write the numbers upside down to represent 67 in binary. Therefore, 1000011 is 67 in binary.

Grouping Method: In this method, we divide the number 67 by 2. Let us see the step-by-step conversion.

Step 1 - Divide the given number 67 by 2. 67 / 2 = 33. Here, 33 is the quotient and 1 is the remainder.

Step 2 - Divide the previous quotient (33) by 2. 33 / 2 = 16. Here, the quotient is 16 and the remainder is 1.

Step 3 - Repeat the previous step. 16 / 2 = 8. Now, the quotient is 8, and 0 is the remainder.

Step 4 - Repeat the previous step. 8 / 2 = 4. Here, the quotient is 4, and 0 is the remainder.

Step 5 - Repeat the previous step. 4 / 2 = 2. Here, the quotient is 2, and 0 is the remainder.

Step 6 - Repeat the previous step. 2 / 2 = 1. Here, the remainder is 0. The quotient is 1.

Step 7 - Divide the quotient (1) by 2. 1 / 2 = 0. Here, the remainder is 1. And we stop the division here because the quotient is 0.

Step 8 - Write down the remainders from bottom to top. Therefore, 67 (decimal) = 1000011 (binary).

There are certain rules to follow when converting any number to binary. Some of them are mentioned below:

Rule 1: Place Value Method

This is one of the most commonly used rules to convert any number to binary. The place value method is the same as the expansion method, where we need to find the largest power of 2. Let’s see a brief step-by-step explanation to understand the first rule. Find the largest power of 2 less than or equal to 67. Since the answer is 2⁶, write 1 next to this power of 2. Subtract the value (64) from 67. So, 67 - 64 = 3. Find the largest power of 2 less than or equal to 3. The answer is 2¹. So, write 1 next to this power. Now, 3 - 2 = 1. So place 1 next to 2⁰. Since there is no remainder, we can write 0 next to the remaining powers (2², 2³, 2⁴, and 2⁵). Final conversion will be 1000011.

Rule 2: Division by 2 Method

The division by 2 method is the same as the grouping method. A brief step-by-step explanation is given below for better understanding. First, 67 is divided by 2 to get 33 as the quotient and 1 as the remainder. Now, 33 is divided by 2. Here, we will get 16 as the quotient and 1 as the remainder. Dividing 16 by 2, we get 8 as the quotient and 0 as the remainder. Divide 8 by 2 to get 4 as the quotient and 0 as the remainder. Divide 4 by 2 to get 2 as the quotient and 0 as the remainder. Divide 2 by 2 to get 1 as the quotient and 0 as the remainder. Finally, divide 1 by 2 to get 0 as the quotient and 1 as the remainder. We stop the division once the quotient becomes 0. Now, we write the remainders upside down to get the binary equivalent of 67, 1000011.

Rule 3: Representation Method

This rule also involves breaking the number into powers of 2. Identify the powers of 2 and write them down in decreasing order, i.e., 2⁶, 2⁵, 2⁴, 2³, 2², 2¹, and 2⁰. Find the largest power that fits into 67. Repeat the process and allocate 1s and 0s to the suitable powers of 2. Combine the digits (0 and 1) to get the binary result.

Rule 4: Limitation Rule

The limitation of the binary system is that only 0s and 1s can be used to represent numbers. The system doesn’t use any other digits other than 0 and 1. This is a base-2 number system, where the binary places represent powers of 2. So, every digit is either a 0 or a 1. To convert 67, we use 0s for 2², 2³, 2⁴, and 2⁵, and 1s for 2⁶, 2¹, and 2⁰.

Learning a few tips and tricks is a great way to solve any mathematical problems easily. Let us take a look at some tips and tricks for binary numbers up to 67.

Memorize to speed up conversions: We can memorize the binary forms for numbers 1 to 67.

Recognize the patterns: There is a peculiar pattern when converting numbers from decimal to binary. 1 → 1 1 + 1 = 2 → 10 2 + 2 = 4 → 100 4 + 4 = 8 → 1000 8 + 8 = 16 → 10000 16 + 16 = 32 → 100000 32 + 32 = 64 → 1000000…and so on. This is also called the double and add rule.

Even and odd rule: Whenever a number is even, its binary form will end in 0. For example, 66 is even and its binary form is 1000010. Here, the binary of 66 ends in 0. If the number is odd, then its binary equivalent will end in 1. For example, the binary of 67 (an odd number) is 1000011. As you can see, the last digit here is 1.

Cross-verify the answers: Once the conversion is done, we can cross-verify the answers by converting the number back to the decimal form. This will eliminate any unforeseen errors in conversion.

Practice by using tables: Writing the decimal numbers and their binary equivalents on a table will help us remember the conversions.

• Decimal: It is the base 10 number system, which uses digits from 0 to 9.

• Binary: This number system uses only 0 and 1. It is also called the base 2 number system.

• Place value: Every digit has a value based on its position in a given number. For example, in 102 (base 10), 1 has occupied the hundreds place, 0 is in the tens place, and 2 is in the ones place.

• Octal: It is the number system with a base of 8. It uses digits from 0 to 7.

• Quotient: The result obtained by dividing one quantity by another.